Hafele 003.15.102 Titebond
- APPLICATION GUIDELINES Application temperature: Above 50°F Open assembly time: 15 minutes (70°F/50°F RH) Total assembly time: minutes (70°F/50°F RH) Minimum required spread: Approximately 6 mils or 250 square feet per gallon Methods of application: For most consistent coverage a mechanical spreader is recommended. Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess. LIMITATIONS Titebond Cold Press for Veneer is specifically designed for veneering and not suited for other types of assembly applications. Not recommended for exterior use or where moisture is likely. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before using. NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY KEEP FROM FREEZING.
- Economical alternative to contact cement
- Formulated to minimize “bleedthrough”
- Moderate speed of set
- No harmful vaporsSafe nonflammable
Attributes
Ship via: Can Ship UPS
Capacity: (5 gal.) 18.9 l
Reviews
There are no reviews yet.